یو پی اس EXIM-POWER PV series 10-120KVA
یو پی اس EXIM-POWER PV series 10-120KVA 3-3
اطلاعات درباره این محصول:
یو پی اس EXIM-POWER PV series 10-120KVA با استفاده از تازه ترین فناوری های موجود و با بهره گیری نوآوریهای فنی توانسته است مناسب ترین درجه محافظت را از تجهیزات پزشکی و سایر دستگاه های حساس توان بالا فراهم آورد و سبب بالابردن امنیت حفاظت از تجهیزات میگردد.
PowerValue PV(II)series is an On-Line double conversion (VFI) UPS with isolation output transformer, unit capacity from 10KVA to 400KVA. It is immune to the interferences on the electric power supply line as it has special input and output filters. World leading DSP technology, with high speed DSP processor 32bits,are adopted to guarantee system’s high stability and giving stable output power supply for all kinds of harsh load.
HIGH SPEED DSP PROCESSOR: Ensuring the operation more fast and stable
OUTPUT 100% UNBALANCE LOAD
The ups can accept 3phase 100% unbalance load to satisfy kinds of load configuration.
ECO function: under good power condition, UPS can work in ECO mode, efficiency reach 98%, green and energy saving;
UPS FOR INDUSTRIAL LOADS
PV-Plus with its strong overload capability, output galvanic isolation and low harmonic current distortion, is the ideal solution for industrial applications.
Thanks to the high battery current, PV Plus Series is suitable to work with large battery banks as it can guarantee recharging in 10 hours as recommended by the battery manufacturer.
OPERATING FLEXIBILITY:All power ratings of the PV(II) series can also be used as Frequency Converters 50 to 60 Hz and vice versa.
Advanced Battery Management (ABM)
Optimal battery management includes:
- Periodic battery test, and automatically transfer between boost charging and float charging to extend battery lifespan
- Automatically adjusting the battery charging current according to battery capacity
- Recharge temperature compensation (optional)
- Remaining back up time display
FULL FRONT ACCESS AND CONVENIENT CABLE CONNECTION
Full frontal access is for all power and electronic components, which reduces the floor space required and consequently reduces the installation costs.
Configured with top and bottom cable connection
The UPS contains the following hardware interfaces:
- RS232 /RS485 interface,
- Dry contacts: battery low,battery discharge,bypass/breakdown
- EPO (Emergency Power Off) contact for UPS shutdown using the remote emergency button.
- SNMP card(optional)
Maximum parallel up to 8 units and share the common battery pack.10-80kva parallel with parallel card only ; 100kva-400kva, parallel card with weaver reactance and different capacity UPS can be also be parallel;
- کاتالوگ این محصول
فرم سفارش این محصول